{"title":"Dust Barriers","description":"","products":[{"product_id":"zipwall-r-kt20-dust-barrier-20-pole-kit-2-pack","title":"ZipWall® KT20 Dust Barrier 20' Pole Kit - 2\/Pack","description":"\u003cp\u003e\u003cstrong\u003eThe tallest pro dust barrier pole – Indispensable for high ceilings, great for smaller jobs too\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwo spring-loaded poles secure a dust barrier up to 20 feet high and 10 feet long. Strong and lightweight anodized aluminum construction. Innovative non-skid, non-marking head and plate. Package includes two poles with parts (heads, plates, and GripDisk™ non-slip pads).\u003c\/p\u003e\n\u003cp\u003eQuick \u0026amp; easy to set up — no ladders, no tape, no damage.\u003c\/p\u003e\n\u003cp\u003eZipWall® 20 dust barrier poles are designed for the professional contractor. Two anodized aluminum sections telescope up to 20 feet and twist to lock. Each spring-loaded pole is easy to set up without a ladder – a major safety benefit when working with high ceilings. The innovative non-skid, non-marking head locks the barrier material, allowing it to be raised with the pole, and holds it securely in place without damaging the ceiling. A tight dust barrier can be set up in just a few minutes, one pole at a time, without ladders, tape, or damage.\u003c\/p\u003e\n\u003cp\u003eThe ZipWall® 20 poles are the tallest dust barrier poles. Anodized aluminum construction makes them sturdier than stainless steel, smoother to raise and to lock, and the best foundation for ZipWall® accessories like FoamRail™ tapeless seals. These poles are versatile – extending from 5’2″ to 20′ – and built for heavy use.\u003c\/p\u003e\n\u003cp\u003eA 12 foot anodized aluminum pole is also available.\u003c\/p\u003e\n\u003cp\u003eThe ZipWall® 20 2-Pack is essential for jobs with high ceilings, and a great add-on to your existing set of ZipWall® dust barrier poles. Two poles can be used to create a barrier up to 10 feet wide, or close off a hallway less than 10 feet wide.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSpring-loaded design for quick, easy, and safe setup\u003c\/li\u003e\n\u003cli\u003eStrong and lightweight anodized aluminum construction\u003c\/li\u003e\n\u003cli\u003eTelescope up to 20′ (from 5′ 2″)\u003c\/li\u003e\n\u003cli\u003eInnovative non-skid, non-marking head and plate\u003c\/li\u003e\n\u003cli\u003eEach pole weighs just 3.25 lb\u003c\/li\u003e\n\u003cli\u003eGripDisks™ prevent sliding on smooth floors\u003c\/li\u003e\n\u003cli\u003eWork with positive and negative air\u003c\/li\u003e\n\u003cli\u003eHelp comply with the EPA RRP rule\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eWeight: 7.8 lb\u003cbr\u003eDimensions: 62.5″ x 3.75″ x 2.75″\u003c\/p\u003e\n\u003ch3\u003eApplications for ZipWall Dust Barrier Poles\u003c\/h3\u003e\n\u003cp\u003eThe ZipWall® dust barrier is used for dust protection in remodeling, renovation, restoration, painting, drywall, flooring, demolition, concrete cutting, sanding, and any interior job that generates dust. Beyond construction, the ZipWall® barrier system is widely used for abatement, mold remediation, water damage or flood restoration, and other interior jobs where contaminants in the dust are a concern. Another driver for the use of ZipWall® barriers is OSHA’s new Silica Rule for Construction which requires the implementation of dust controls.\u003c\/p\u003e\n\u003cp\u003eHeavy users of ZipWall® products include professional contractors – general contractors and tradesmen – and facility managers. ZipWall® barriers can be found in healthcare facilities, hospitality and retail spaces, manufacturing, government and education buildings, transportation and property management buildings, and of course, in the residential market where the ZipWall® system originated.\u003c\/p\u003e\n\u003ch3\u003eTips for setting up a dust barrier\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWhen using plastic, cut it to size ahead of time.\u003c\/li\u003e\n\u003cli\u003eSet up the barrier one pole at a time starting at the wall. Leave the plastic loose at the bottom and make sure the spring at the top of the pole is not compressed all the way.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOnce ALL poles are in place, do the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTuck the plastic under each pole.\u003c\/li\u003e\n\u003cli\u003ePlace a GRIP DISK on the floor under the pole.\u003c\/li\u003e\n\u003cli\u003eCompress the spring at the top of each pole all the way up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIMPORTANT: Placing a GripDisk™ non-skid pad under each pole ensures the barrier will stay securely in place even on smooth floors or when used with negative air pressure.\u003c\/p\u003e","brand":"ZipWall","offers":[{"title":"Default Title","offer_id":35451408613525,"sku":"08KT20","price":449.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/6678\/4139\/products\/zipwall-20-2-pack-dust-barrier-poles-kt20.jpg?v=1596033735"},{"product_id":"zipwall-r-slp2-dust-barrier-12-pole-kit-2-pack","title":"ZipWall® SLP2 Dust Barrier 12' Pole Kit - 2\/Pack","description":"\u003cp\u003e\u003cstrong\u003eIdeal for professional contractors – both commercial and residential\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwo spring-loaded poles secure a dust barrier up to 12 feet high and 10 feet wide. Strong and lightweight anodized aluminum construction. Innovative non-skid, non-marking head and plate. Package contains two poles with parts (heads, plates, and GripDisk™ non-slip pads).\u003c\/p\u003e\n\u003cp\u003eQuick \u0026amp; easy to set up — no ladders, no tape, no damage.\u003c\/p\u003e\n\u003cp\u003eZipWall® 12 spring-loaded dust barrier poles are designed for the professional contractor. They are easy to use, easy to store, and a significant time saver! These poles are strong and lightweight, telescope up to 12 feet high and twist to lock. Each spring-loaded pole takes seconds to set up without a ladder. The innovative non-skid, non-marking head locks the barrier material, allowing it to be raised with the pole, and holds it securely in place without damaging the ceiling. A tight dust barrier can be set up in just a few minutes, one pole at a time, without ladders, tape, or damage.\u003c\/p\u003e\n\u003cp\u003eThe ZipWall® 12 poles are the prime ZipWall® poles. Anodized aluminum construction makes them sturdier than stainless steel, smoother to raise and to lock, and the best foundation for ZipWall® accessories like FoamRail™ tapeless seals. These poles are built for heavy use and their size is perfect for both residential and commercial jobs.\u003c\/p\u003e\n\u003cp\u003eA 20 foot anodized aluminum pole is also available.\u003c\/p\u003e\n\u003cp\u003eThe 2-Pack is ideal for adding to your ZipWall® Dust Barrier System. Two poles can also be used to close off a hallway or small room less than 10 feet wide.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpring-loaded design for quick, easy, and safe setup\u003c\/li\u003e\n\u003cli\u003eStrong and lightweight anodized aluminum construction\u003c\/li\u003e\n\u003cli\u003eTelescope up to 12′ (from 4′ 7″)\u003c\/li\u003e\n\u003cli\u003eInnovative non-skid, non-marking head and plate\u003c\/li\u003e\n\u003cli\u003eEach pole weighs just 2 lb\u003c\/li\u003e\n\u003cli\u003eGripDisks™ prevent sliding on smooth floors\u003c\/li\u003e\n\u003cli\u003eWork with positive and negative air\u003c\/li\u003e\n\u003cli\u003eHelp comply with the EPA RRP rule\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications for ZipWall Dust Barrier Poles\u003c\/h3\u003e\n\u003cp\u003eThe ZipWall® dust barrier is used for dust protection in remodeling, renovation, restoration, painting, drywall, flooring, demolition, concrete cutting, sanding, and any interior job that generates dust. Beyond construction, the ZipWall® barrier system is widely used for abatement, mold remediation, water damage or flood restoration, and other interior jobs where contaminants in the dust are a concern. Another driver for the use of ZipWall® barriers is OSHA’s new Silica Rule for Construction which requires the implementation of dust controls.\u003c\/p\u003e\n\u003cp\u003eHeavy users of ZipWall® products include professional contractors – general contractors and tradesmen – and facility managers. ZipWall® barriers can be found in healthcare facilities, hospitality and retail spaces, manufacturing, government and education buildings, transportation and property management buildings, and of course, in the residential market where the ZipWall® system originated.\u003c\/p\u003e\n\u003ch3\u003eTips for setting up a dust barrier\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWhen using plastic, cut it to size ahead of time.\u003c\/li\u003e\n\u003cli\u003eSet up the barrier one pole at a time starting at the wall. Leave the plastic loose at the bottom and make sure the spring at the top of the pole is not compressed all the way.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOnce ALL poles are in place, do the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTuck the plastic under each pole.\u003c\/li\u003e\n\u003cli\u003ePlace a GRIP DISK on the floor under the pole.\u003c\/li\u003e\n\u003cli\u003eCompress the spring at the top of each pole all the way up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIMPORTANT: Placing a GripDisk™ non-skid pad under each pole ensures the barrier will stay securely in place even on smooth floors or when used with negative air pressure.\u003c\/p\u003e","brand":"ZipWall","offers":[{"title":"Default Title","offer_id":35451632582805,"sku":"08SLP2C","price":195.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/6678\/4139\/products\/zipwall-12-2-pack-dust-barrier-poles-slp2.jpg?v=1596035219"},{"product_id":"task-quick-support-rod-r","title":"Task Quick Support Rod®","description":"\u003cul\u003e\n\u003cli\u003eEVA (Ethylene Vinyl Acetate) Foam grip enables better hold on rod under wet working conditions\u003c\/li\u003e\n\u003cli\u003ePatented built-in push-lock pin system on extension tubes which is proven and secured for safety measures\u003c\/li\u003e\n\u003cli\u003eVersatile tiltable rubber pads adjusts to different applications at home or job sites\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Use the Task Quick Support Rod®\u003c\/h3\u003e\n\u003cp\u003eA short video on how to use your Task QSR®. The QSR® is available in three sizes, plus an optional extension to suit numerous applications, it’s your extra set of hands while on the job. The load-bearing weight capacity and patented locking mechanism makes QSR® the toughest and most versatile support rod on the market.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.task-tools.com\/media\/wysiwyg\/Articles-and-Docs\/Task_QSR_Catalogue_2020.pdf\"\u003eDOWNLOAD 2020 QSR CATALOG\u003c\/a\u003e\u003c\/p\u003e","brand":"Task","offers":[{"title":"Short - 2' 6\" - 4' 6\" (76 cm - 137 cm)","offer_id":35456390693013,"sku":"08T74505","price":51.97,"currency_code":"CAD","in_stock":true},{"title":"Medium - 5' 3\" - 10' (160 cm - 305 cm)","offer_id":35456390725781,"sku":"08T74500","price":59.47,"currency_code":"CAD","in_stock":true},{"title":"Long - 6' 9\" - 13' 3\" (206 cm - 404 cm)","offer_id":35456390758549,"sku":"08T74490","price":76.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/6678\/4139\/products\/t74490_full.jpg?v=1596053649"},{"product_id":"task-3-x-7-heavy-duty-qsr-zipper-2-pack","title":"Task 3\" x 7' Heavy Duty QSR® Zipper - 2\/pack","description":"\u003cul\u003e\n\u003cli\u003eAllows an immediate entrance or exit to any enclosed area\u003c\/li\u003e\n\u003cli\u003eContains dust, debris \u0026amp; heat\u003c\/li\u003e\n\u003cli\u003eMeets federal containment specifications for asbestos removal\u003c\/li\u003e\n\u003cli\u003eRecommend the use of 2 zippers approximately 4'-5' apart to create a roll-up door to facilitate ease of use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.task-tools.com\/media\/wysiwyg\/Articles-and-Docs\/Task_QSR_Catalogue_2020.pdf\"\u003eDOWNLOAD 2020 QSR CATALOG\u003c\/a\u003e\u003c\/p\u003e","brand":"Task","offers":[{"title":"Default Title","offer_id":35456663388309,"sku":"08T74545","price":25.89,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/6678\/4139\/products\/t74545.jpg?v=1596054639"},{"product_id":"task-qsr-heavy-duty-dust-containment-door-kit","title":"Task QSR Heavy Duty Dust Containment Door Kit","description":"\u003cstrong\u003eDoor\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eMake a zipper door for dust thermal containment in minutes\u003c\/li\u003e\n\u003cli\u003eFor door openings up to 8' high x 4' wide\u003c\/li\u003e\n\u003cli\u003eMade from heavy duty 6 mil fire retardant poly\u003c\/li\u003e\n\u003cli\u003eDouble pull zipper slider opens door from either side\u003c\/li\u003e\n\u003cli\u003eOpen and close door with one hand\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDust Containment Tape\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor securing tarps or poly sheeting to surfaces such as wood, glass, aluminum, plastic, vinyl and painted surfaces\u003c\/li\u003e\n\u003cli\u003eClear poly tape adhesive side is moisture resistant and strong to aggressively bond and hold heavy sheeting materials\u003c\/li\u003e\n\u003cli\u003eMasking tape adhesive side is easy to remove cleanly from surfaces for up to 14 days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Use the Task Quick Support Rod®\u003c\/h3\u003e\n\u003cp\u003eA short video on how to use your Task QSR®. The QSR® is available in three sizes, plus an optional extension to suit numerous applications, it’s your extra set of hands while on the job. The load-bearing weight capacity and patented locking mechanism makes QSR® the toughest and most versatile support rod on the market.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.task-tools.com\/media\/wysiwyg\/Articles-and-Docs\/Task_QSR_Catalogue_2020.pdf\"\u003eDOWNLOAD 2020 QSR CATALOGUE\u003c\/a\u003e\u003c\/p\u003e","brand":"Task","offers":[{"title":"Default Title","offer_id":41771549065365,"sku":"08T74517","price":49.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/6678\/4139\/products\/T74517-1.jpg?v=1641915257"},{"product_id":"zipwall®-kt20-dust-barrier-20-pole-kit-2-pack-copy","title":"ZipWall® ZDS ZipDoor® Standard Door Kit","description":"\u003cp\u003e\u003cstrong\u003eSeal any doorway in just a minute!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eQuickly cover a doorway to provide an airtight seal with this plastic zippered door. The door, made of 4 mil plastic sheeting, attaches to the doorframe with a special double-sided tape that protects the frame surface. Preinstalled heavy-duty zippers provide easy entry and exit. Flap hooks hold the door open for easy access.\u003c\/p\u003e\n\u003cp\u003eThe ZipDoor® Standard kit includes one zippered door, one roll of tape, and two flap hooks. It fits a standard door up to 3.5′ x 7′. A commercial size kit is also available.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA significant time saver on large jobs!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen you just need to seal off a doorway, this plastic zippered door is the ideal solution. Use it to section off part of a property during remodeling, restoration, or any other messy project. The ZipDoor® Kit is easy to set up and includes everything you need. The door is made of 4 mil plastic sheeting and comes with preinstalled heavy-duty zippers that provide access to the work area. The special two-sided tape has a strong adhesive on one side for securing the plastic door and a gentle adhesive on the other side for protecting the doorframe. Flap hooks are also included in the kit for holding the door open when needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZipDoor® Standard Door Kit\u003c\/strong\u003e fits a standard door. The zippered door panel is 4′ x 7.5′. A larger commercial ZipDoor® kit is also available. The commercial door is flame retardant.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAirtight\u003c\/li\u003e\n\u003cli\u003eHeavy-duty zippers are preinstalled\u003c\/li\u003e\n\u003cli\u003eZipWall® double-sided tape securely holds the door panel while protecting the doorframe surface\u003c\/li\u003e\n\u003cli\u003eFlap hooks hold door open for easy access\u003c\/li\u003e\n\u003cli\u003eQuick and easy to install\u003c\/li\u003e\n\u003cli\u003eA significant time saver on large jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping Information\u003c\/h3\u003e\n\u003cp\u003eWeight: 1.2 lbDimensions: 12″ x 8.75″ x 1.5″\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"ZipWall","offers":[{"title":"Default Title","offer_id":51668137247086,"sku":"08ZDS","price":51.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/6678\/4139\/files\/zipdoor-standard-door-kit-zds.jpg?v=1730346165"},{"product_id":"zipwall®-az2-standard-zipper-2-pack","title":"ZipWall® AZ2 Standard Zipper – 2 Pack","description":"\u003cp\u003e\u003cstrong\u003eCreate an entry in a plastic barrier in seconds\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSelf-adhesive zippers attach to plastic sheeting and create an entry in a plastic dust barrier wherever you need it. Flap hooks hold entryway open for easy access. Includes two zippers and two flap hooks.\u003c\/p\u003e\n\u003cp\u003eNote: The patented ZipperKnife™ does not come with nor works with this product.\u003c\/p\u003e\n\u003cp\u003eThis product is perfect for short, light traffic jobs. See ZipWall® Heavy-Duty Zippers for a professional grade option.\u003c\/p\u003e\n\u003cp\u003eTwo ZipWall® standard zippers create a hands-free entry – simply roll up the flap and hold the door open using two flap hooks. This hands-free door can be as wide as needed to get equipment and supplies in and out of the worksite.\u003c\/p\u003e\n\u003ch3\u003eShipping Information\u003c\/h3\u003e\n\u003cp\u003eWeight: 5.8 ozDimensions: 8.5″ x 3.5″ x 2″\u003c\/p\u003e","brand":"ZipWall","offers":[{"title":"Default Title","offer_id":51668138459502,"sku":"08AZ2","price":24.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/6678\/4139\/files\/zipwall-standard-zipper-2-pack-az2.jpg?v=1730346973"},{"product_id":"zipwall®-zp2-zippole®-dust-barrier-10-pole-kit-2-pack","title":"ZipWall® ZP2 ZipPole® Dust Barrier 10' Pole Kit - 2\/Pack","description":"\u003cp\u003e\u003cstrong\u003eGreat for residential jobs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwo spring-loaded poles secure a dust barrier up to 10 feet high and 10 feet wide. Strong and lightweight stainless steel construction. Innovative non-skid, non-marking head and plate. Package contains two poles with parts (heads, plates, and GripDisk™ non-slip pads).\u003c\/p\u003e\n\u003cp\u003eQuick \u0026amp; easy to set up — no ladders, no tape, no damage.\u003c\/p\u003e\n\u003cp\u003eZipWall® 10 spring-loaded dust barrier poles are strong and lightweight, telescope up to 10 feet high and twist to lock. They are an ideal dust protection solution for residential remodeling, renovation, and repair work. Contractors and DIY home owners alike find these poles easy to use, easy to store, and a significant time saver.\u003c\/p\u003e\n\u003cp\u003eEach spring-loaded pole takes seconds to set up without a ladder. The innovative non-skid, non-marking head locks the barrier material onto the pole, allowing it to be raised with the pole, and holds it securely in place without damaging the ceiling. A tight dust barrier can be set up in just a few minutes, one pole at a time, without ladders, tape, or damage.\u003c\/p\u003e\n\u003cp\u003eThe 2-Pack is a great add-on for an existing ZipWall® Dust Barrier System. Two poles can also be used to seal off a hallway or a small room less than 10 feet wide.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSpring-loaded design for quick, easy, and safe setup\u003c\/li\u003e\n\u003cli\u003eStrong and lightweight stainless steel construction\u003c\/li\u003e\n\u003cli\u003eTelescope up to 10′ 3″ (from 4′ 2″)\u003c\/li\u003e\n\u003cli\u003eInnovative non-skid, non-marking head and plate\u003c\/li\u003e\n\u003cli\u003eEach pole weighs just 1.5 lb\u003c\/li\u003e\n\u003cli\u003eGripDisks™ prevent sliding on smooth floors\u003c\/li\u003e\n\u003cli\u003eWork with positive and negative air\u003c\/li\u003e\n\u003cli\u003eHelp comply with the EPA RRP rule\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping Information\u003c\/h3\u003e\n\u003cp\u003eWeight: 4.1 lbDimensions: 50.25″ x 3″ x 2.25″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTips for setting up a dust barrier\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhen using plastic, cut it to size ahead of time.\u003c\/li\u003e\n\u003cli\u003eSet up the barrier one pole at a time starting at the wall. Leave the plastic loose at the bottom and make sure the spring at the top of the pole is not compressed all the way.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOnce ALL poles are in place, do the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTuck the plastic under each pole.\u003c\/li\u003e\n\u003cli\u003ePlace a GRIP DISK on the floor under the pole.\u003c\/li\u003e\n\u003cli\u003eCompress the spring at the top of each pole all the way up. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIMPORTANT: Placing a GripDisk™ non-skid pad under each pole ensures the barrier will stay securely in place even on smooth floors or when used with negative air pressure.\u003c\/p\u003e\n\u003ch3\u003eApplications for ZipWall dust barrier poles\u003c\/h3\u003e\n\u003cp\u003eThe ZipWall® dust barrier is used for dust protection in remodeling, renovation, restoration, painting, drywall, flooring, demolition, concrete cutting, sanding, and any interior job that generates dust. Beyond construction, the ZipWall® barrier system is widely used for abatement, mold remediation, water damage or flood restoration, and other interior jobs where contaminants in the dust are a concern. Another driver for the use of ZipWall® barriers is OSHA’s new Silica Rule for Construction which requires the implementation of dust controls.\u003c\/p\u003e\n\u003cp\u003eHeavy users of ZipWall® products include professional contractors – general contractors and tradesmen – and facility managers. ZipWall® barriers can be found in healthcare facilities, hospitality and retail spaces, manufacturing, government and education buildings, transportation and property management buildings, and of course, in the residential market where the ZipWall® system originated.\u003c\/p\u003e","brand":"ZipWall","offers":[{"title":"Default Title","offer_id":51668141867374,"sku":"08ZP2","price":144.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/6678\/4139\/files\/zipwall-10-dust-barrier-poles-zp2.jpg?v=1730347781"},{"product_id":"zipwall®-zp2-zippole®-dust-barrier-10-pole-kit-2-pack-copy","title":"ZipWall® ZP4 ZipPole® Dust Barrier 10' Pole Kit - 4\/Pack","description":"\u003cp\u003e\u003cstrong\u003eGreat for residential jobs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFour spring-loaded poles secure a dust barrier up to 10 feet high and 30 feet wide. Strong and lightweight stainless steel construction. Innovative non-skid, non-marking head and plate. This kit includes four poles with parts (heads, plates, and GripDisk™ non-slip pads), two self-adhesive zippers with flap hooks, and a carry bag. It is a perfect ZipWall® starter kit.\u003c\/p\u003e\n\u003cp\u003eQuick \u0026amp; easy to set up — no ladders, no tape, no damage.\u003c\/p\u003e\n\u003cp\u003eZipWall® 10 spring-loaded dust barrier poles are strong and lightweight, telescope up to 10 feet high and twist to lock. They are an ideal dust protection solution for residential remodeling, renovation, and repair work. Contractors and DIY home owners alike find these poles easy to use, easy to store, and a significant time saver.\u003c\/p\u003e\n\u003cp\u003eEach spring-loaded pole takes seconds to set up without a ladder. The innovative non-skid, non-marking head locks the barrier material onto the pole, allowing it to be raised with the pole, and holds it securely in place without damaging the ceiling. A tight dust barrier can be set up in just a few minutes, one pole at a time, without ladders, tape, or damage.\u003c\/p\u003e\n\u003cp\u003eFour poles can be used to create a dust barrier up to 10 feet high and 30 feet wide, or a three-sided room-within-a-room. With the carry bag, the 4-Pack is a handy one to keep in every truck, and the perfect ZipWall® starter kit!\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSpring-loaded design for quick, easy, and safe setup\u003c\/li\u003e\n\u003cli\u003eStrong and lightweight stainless steel construction\u003c\/li\u003e\n\u003cli\u003eTelescope up to 10′ 3″ (from 4′ 2″)\u003c\/li\u003e\n\u003cli\u003eInnovative non-skid, non-marking head and plate\u003c\/li\u003e\n\u003cli\u003eEach pole weighs just 1.5 lb\u003c\/li\u003e\n\u003cli\u003eGripDisks™ prevent sliding on smooth floors\u003c\/li\u003e\n\u003cli\u003eWork with positive and negative air\u003c\/li\u003e\n\u003cli\u003eHelp comply with the EPA RRP rule\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping Information\u003c\/h3\u003e\n\u003cp\u003eWeight: 9.4 lbDimensions: 50.25″ x 5″ x 3.5″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTips for setting up a dust barrier\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhen using plastic, cut it to size ahead of time.\u003c\/li\u003e\n\u003cli\u003eSet up the barrier one pole at a time starting at the wall. Leave the plastic loose at the bottom and make sure the spring at the top of the pole is not compressed all the way.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOnce ALL poles are in place, do the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTuck the plastic under each pole.\u003c\/li\u003e\n\u003cli\u003ePlace a GRIP DISK on the floor under the pole.\u003c\/li\u003e\n\u003cli\u003eCompress the spring at the top of each pole all the way up. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIMPORTANT: Placing a GripDisk™ non-skid pad under each pole ensures the barrier will stay securely in place even on smooth floors or when used with negative air pressure.\u003c\/p\u003e\n\u003ch3\u003eApplications for ZipWall dust barrier poles\u003c\/h3\u003e\n\u003cp\u003eThe ZipWall® dust barrier is used for dust protection in remodeling, renovation, restoration, painting, drywall, flooring, demolition, concrete cutting, sanding, and any interior job that generates dust. Beyond construction, the ZipWall® barrier system is widely used for abatement, mold remediation, water damage or flood restoration, and other interior jobs where contaminants in the dust are a concern. Another driver for the use of ZipWall® barriers is OSHA’s new Silica Rule for Construction which requires the implementation of dust controls.\u003c\/p\u003e\n\u003cp\u003eHeavy users of ZipWall® products include professional contractors – general contractors and tradesmen – and facility managers. ZipWall® barriers can be found in healthcare facilities, hospitality and retail spaces, manufacturing, government and education buildings, transportation and property management buildings, and of course, in the residential market where the ZipWall® system originated.\u003c\/p\u003e","brand":"ZipWall","offers":[{"title":"Default Title","offer_id":51668155695470,"sku":"08ZP4","price":399.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/6678\/4139\/files\/zipwall-10-dust-barrier-poles-zp4.jpg?v=1730348572"},{"product_id":"zipwall®-mdk-magnetic-dust-barrier-door-kit","title":"ZipWall® MDK Magnetic Dust Barrier Door Kit","description":"\u003cp\u003eQuick and easy to install, the ZipWall® magnetic door attaches to the barrier material with specially designed magnetic strips. Powerful self-closing action maintains a tight seal. The door is reusable and can easily handle high traffic.\u003c\/p\u003e\n\u003cp\u003eIncludes one 7′ 2″ x 4′ 7″ door panel, six magnetic strips, one header bar, and a carry bag.\u003c\/p\u003e\n\u003cp\u003eWorks with all ZipWall® poles. Poles are sold separately.\u003c\/p\u003e\n\u003cp\u003eThe ZipWall® magnetic dust barrier door is the easiest way to get in and out of a dust barrier. It is self-closing, and can easily handle high traffic.\u003c\/p\u003e\n\u003cp\u003eSetting up the magnetic door takes just a few minutes. A header bar holds the door up between two ZipWall® poles. The magnetic door panel attaches to the barrier material with specially designed magnetic strips. Powerful self-closing action maintains a tight seal. Poles are sold separately.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003eAdjustable header bar for ease of installation\u003cbr\u003eSpecially designed magnetic strips create a continuous seal around the edge of the door\u003cbr\u003eHigh-tech fabric panel features a clear plastic window\u003cbr\u003eSelf-closing magnets are sewn-in\u003cbr\u003eCan be used with positive or negative air\u003cbr\u003eWorks with all ZipWall® dust barrier poles\u003cbr\u003eA heavy-duty storage tube and carry bag are included\u003c\/p\u003e\n\u003cp\u003ePoles are not included.\u003c\/p\u003e","brand":"ZipWall","offers":[{"title":"Default Title","offer_id":53872490938734,"sku":"08MDK","price":399.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0277\/6678\/4139\/files\/zipwall-magnetic-dust-barrier-door-kit-mdk.jpg?v=1780504223"}],"url":"https:\/\/csrtools.com\/collections\/dust-barriers.oembed","provider":"CSR Building Supplies","version":"1.0","type":"link"}